Scheduler can't stream live
Scheduler can't stream live
Hi
I can record a live stream in the recorder mobile but I get tune failed in the scheduler console.
I've checked the shares and then are fine. I've checked the firewall and they are all fine. I can ping the recording service from the scheduler no problems too.
I have the same problem when trying to watch from a client.
I'm tearing my hair out at the moment!
Spec :
Windows 2008 server r2
Tbs 6982 dvb s
I can record a live stream in the recorder mobile but I get tune failed in the scheduler console.
I've checked the shares and then are fine. I've checked the firewall and they are all fine. I can ping the recording service from the scheduler no problems too.
I have the same problem when trying to watch from a client.
I'm tearing my hair out at the moment!
Spec :
Windows 2008 server r2
Tbs 6982 dvb s
-
- Posts: 1070
- Joined: Wed Oct 19, 2011 9:39 am
- Location: Berne / Switzerland
Re: Scheduler can't stream live
Hi Kevz65
And what are your clients specs? Do you have any client, from which you can actually watch live streams?
Leave your hair..!
Chris
And what are your clients specs? Do you have any client, from which you can actually watch live streams?
Leave your hair..!
Chris
"One must still have chaos within oneself, to give birth to a dancing star." (F. Nietzsche)
Scheduler can't stream live
Hi Chris.
Thanks for the reply.
The client is XBMC. I have no client that works. Only the recorder console is able to record. As I mentioned before the scheduler console gives me 'failed to tune'.
I should add that both the recorder service and scheduler are on the same pc. I will post logs in the next few hours.
Thanks for the reply.
The client is XBMC. I have no client that works. Only the recorder console is able to record. As I mentioned before the scheduler console gives me 'failed to tune'.
I should add that both the recorder service and scheduler are on the same pc. I will post logs in the next few hours.
-
- Posts: 1070
- Joined: Wed Oct 19, 2011 9:39 am
- Location: Berne / Switzerland
Re: Scheduler can't stream live
Hi!
If you get ¨failed to tune¨, you´ll also get no live streaming from within scheduler console, I guess? Scheduler Console --> Live TV
Those XBMC clients - on which OS´ are they running?
And usually, with your cards, also some media software is delivered - is this properly streaming live TV?
Greetz - Chris
If you get ¨failed to tune¨, you´ll also get no live streaming from within scheduler console, I guess? Scheduler Console --> Live TV
Those XBMC clients - on which OS´ are they running?
And usually, with your cards, also some media software is delivered - is this properly streaming live TV?
Greetz - Chris
"One must still have chaos within oneself, to give birth to a dancing star." (F. Nietzsche)
Scheduler can't stream live
Correct. Live streaming doesn't work from scheduler console either. The OS is all windows but I don't think it's a client problem.
I used to use my card with tvheadend in Linux. Worked fine.
I used to use my card with tvheadend in Linux. Worked fine.
-
- Posts: 1070
- Joined: Wed Oct 19, 2011 9:39 am
- Location: Berne / Switzerland
Re: Scheduler can't stream live
Ok, then we don´t have to mess around with client things for the time being. First, streaming in Scheduler Console must work (if you installed VLC properly? Pls note, that eg a portable VLC version would not be enough - you need the reg entries - not for later claients, but for streaming from Scheduler Console)
Scanning process went well?
You said, recordings are working - do you have prior to a proper recordings one or more ¨failed to tune¨ error msgs in the log, as well?
Scanning process went well?
You said, recordings are working - do you have prior to a proper recordings one or more ¨failed to tune¨ error msgs in the log, as well?
"One must still have chaos within oneself, to give birth to a dancing star." (F. Nietzsche)
Re: Scheduler can't stream live
Christoph21x wrote:Ok, then we don´t have to mess around with client things for the time being. First, streaming in Scheduler Console must work (if you installed VLC properly? Pls note, that eg a portable VLC version would not be enough - you need the reg entries - not for later claients, but for streaming from Scheduler Console)
Scanning process went well?
You said, recordings are working - do you have prior to a proper recordings one or more ¨failed to tune¨ error msgs in the log, as well?
I have a full VLC install done - seems to be working fine.
Scanning goes without a hitch - all is good here.
Recording works fine from the recording console (Status section)
Here are various logs, after i go to Scheduler Console > Live TV/Radio:
Scheduler log
Code: Select all
2014-10-11 11:55:17.7843 [Error][24]: System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:49953
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at ArgusTV.Common.Recorders.Utility.RestProxyBase.<ExecuteRequestAsync>d__b.MoveNext()
Code: Select all
2014-10-11 11:36:27.2915 [Info ][Graph]: Tuning to BBC Two Eng
2014-10-11 11:36:27.4163 [Info ][Graph]: MDAPI: enabled filter for 1 slots
2014-10-11 11:36:27.4943 [Debug][Graph]: Added BDA tuner for device TBS 6982 DVBS/S2 Tuner A
2014-10-11 11:36:27.5411 [Debug][Graph]: Using filter TBS 6982 BDA Digital Capture A DVBS
2014-10-11 11:36:27.6659 [Debug][Graph]: Saved graph to C:\ProgramData\ARGUS TV\Graphs\Card-2.grf
2014-10-11 11:36:27.6659 [Debug][Graph]: Detected 1 signal statistics interfaces
2014-10-11 11:36:27.6659 [Info ][Graph]: Detected Turbosight PCI/PCIe card TBS 6982 DVBS/S2 Tuner A
2014-10-11 11:36:27.6815 [Debug][Graph]: TBS: No CAM detected
2014-10-11 11:36:27.6815 [Info ][Graph]: Tuning to 10773000 LinearH 22000 Rate5_6 ModQpsk
2014-10-11 11:36:27.6815 [Debug][Graph]: Starting graph
2014-10-11 11:36:30.0371 [Warn ][Graph]: Signal not locked!
2014-10-11 11:36:30.0371 [Debug][Graph]: Stopping graph
Code: Select all
2014-10-11 11:36:27.1979 [Info ][Recorder]: TuneLiveTvStream(): tuning card #2 to BBC Two Eng
2014-10-11 11:36:27.2447 [Info ][Recorder]: Starting live stream on card #2, service BBC Two Eng in 'C:\Users\Public\Videos\ARGUS TV Timeshift'
2014-10-11 11:36:30.2087 [Warn ][Recorder]: Failed to start live stream on card #2
2014-10-11 11:36:30.2087 [Error][Recorder]: TuneLiveTvStream(): failed to tune to BBC Two Eng, error NoSignal
-
- Posts: 1070
- Joined: Wed Oct 19, 2011 9:39 am
- Location: Berne / Switzerland
Re: Scheduler can't stream live
Do you have a recent recording with that card of BBC Two Eng?
If so, could you drop please also a snippet from those log entries?
Your logäbove clearly says ¨no signal¨
If so, could you drop please also a snippet from those log entries?
Your logäbove clearly says ¨no signal¨
"One must still have chaos within oneself, to give birth to a dancing star." (F. Nietzsche)
Re: Scheduler can't stream live
it seems like i can no longer get streaming working in the recorder console either. 'No signal' error. I reinstalled ARgus TV, but no luck.
I scanned for channels from scratch and found 800 services. Mapped these to channels but still get no signal now in both the recorder and scheduler console
I scanned for channels from scratch and found 800 services. Mapped these to channels but still get no signal now in both the recorder and scheduler console
-
- Posts: 1070
- Joined: Wed Oct 19, 2011 9:39 am
- Location: Berne / Switzerland
Re: Scheduler can't stream live
I thought so. This error message comes either with both - recording and live TV - or not at all.
1. In recorder console, all channels are mapped to the found services? If you find per channel more than one service, try for a single channel each sequentially with Live TV
2. Check in Scheduler Console that the recorder is reachable and shares are accessible. Make sure, that the recorders address starts with ¨https¨ not ¨net tcp¨. To stay on the safe side, delete the recorder and add it again as a new one.
If not successful, then I would try
1. Uninstall & reinstall drivers - make sure, BDA is selected (if selectable)
2. Reboot and try again with Argus
3. Try with MediaPortal TV Server (which could then also be used with Argus directly; you have to add in scheduler console a MP recorder and deactivate or delete)
1. In recorder console, all channels are mapped to the found services? If you find per channel more than one service, try for a single channel each sequentially with Live TV
2. Check in Scheduler Console that the recorder is reachable and shares are accessible. Make sure, that the recorders address starts with ¨https¨ not ¨net tcp¨. To stay on the safe side, delete the recorder and add it again as a new one.
If not successful, then I would try
1. Uninstall & reinstall drivers - make sure, BDA is selected (if selectable)
2. Reboot and try again with Argus
3. Try with MediaPortal TV Server (which could then also be used with Argus directly; you have to add in scheduler console a MP recorder and deactivate or delete)
"One must still have chaos within oneself, to give birth to a dancing star." (F. Nietzsche)
Who is online
Users browsing this forum: No registered users and 6 guests