Hi,
KabelBW updated their setup in April 2014.
Since then all recordings for sixx fail.
A rescan doesn't find sixx anymore.
Could anybody provide me with a corrected kabelBW XML?
Thanks
Mic
Since Broadcaster KabelBW update channel sixx is missing
Re: Since Broadcaster KabelBW update channel sixx is missing
Hi,
I have the same Problem.
The channel is now on
S02 // 114 Mhz // Modulation: 256 QAM // Symbolrate: 6,900 // Tsid: 161 // Onid: 9999
When I make a scan with this Settings my SilconDust device can find the channel.
<transponder frequency="114000000" symbol_rate="6900000" fec_inner="0" modulation="3"/>
But my DigitalDevice tuner doesn't find anything on this frequency. When I map the channel to DigitalDevice it is not able to tune to this channel.
Mediaportal Tuner is working but I have some issues with CAM.
I can make log files, everything you Need.
Tonitom
I have the same Problem.
The channel is now on
S02 // 114 Mhz // Modulation: 256 QAM // Symbolrate: 6,900 // Tsid: 161 // Onid: 9999
When I make a scan with this Settings my SilconDust device can find the channel.
<transponder frequency="114000000" symbol_rate="6900000" fec_inner="0" modulation="3"/>
But my DigitalDevice tuner doesn't find anything on this frequency. When I map the channel to DigitalDevice it is not able to tune to this channel.
Mediaportal Tuner is working but I have some issues with CAM.
I can make log files, everything you Need.
Tonitom
Re: Since Broadcaster KabelBW update channel sixx is missing
I guess 5 would be the correct modulation for QAM 256.
After I found out it was on frequency 114kHz I added all modulations in the cable.xml one of them worked.
If you are right, that it is the 256 try 5.
After I found out it was on frequency 114kHz I added all modulations in the cable.xml one of them worked.
If you are right, that it is the 256 try 5.
Re: Since Broadcaster KabelBW update channel sixx is missing
Ok THX, that was my fault.
It's interesting that my SiliconDust found the channel with the wrong modulation.
Thx
Tonitom
Gesendet von meinem iPad mit Tapatalk
It's interesting that my SiliconDust found the channel with the wrong modulation.
Thx
Tonitom
Gesendet von meinem iPad mit Tapatalk
Re: Since Broadcaster KabelBW update channel sixx is missing
Can I at least manually enter code into the MySQL database so I can manually add this channel and stop using both pieces of software unnecessarily?
EDIT: I attempted to do this by changing PID 10 to 11 but it kept refusing to tune to that channel.
I am totally out of ideas on this, mainly because I don't even understand why it can't find the channel to begin with.
EDIT: I attempted to do this by changing PID 10 to 11 but it kept refusing to tune to that channel.
I am totally out of ideas on this, mainly because I don't even understand why it can't find the channel to begin with.
aliiiiiii
Who is online
Users browsing this forum: No registered users and 41 guests